Where to Buy Defy Products Online

About 1 month again I installed concrete paver stones (16 X 24) over an existing old concrete patio that was 24 feet wide.  I alternated the pattern to prevent exaggerating lines in joints.  I used Easy Joint instead of polymeric sand. 
Because of the alternating pattern, I had to cut a few pavers in half using a rented paving saw that used water. I did not rinse off the stones thoroughly after they were cut.  I assumed that would be easy enough using a hose with a power nozzle.  Wrong!  Now I am going to seal the patio using your Masonary Saver Paver sealer.  I want a wet look and limited gloss.  
My question is, "What should I do about the white-spotted pavers before sealing it?  Like I said, all I have really done is blast it with a hose nozzle and have not really scrubbed it or applied anything to it.
Also, how long should the patio dry out from rain and/or additional washing before the sealer is sprayed on?
Thank You
Terry Sellers

We used Defy deck stain on our new deck which we love.   However, we got stain on the white azec trim.  How do we safely clean the stain without hrting the azec/trex?

What would be the price to ship one gallon to Canada?

Trying to order 5 gallons of Defy Extreme from BC Canada. Is the final cost of $344.62 in US or Canadian dollars?

Will defy stain stripper remove a newly sealed deck with toner weather sealer?

Is there a dealer in Montrose or Grand Junction that sells it?

Hello
In my previous question you said I could use your extreme composite deck sealer on a new outdoor Composite table. But when I looked up the directions it says not designed for use on new composite lumber.
So I am confused can you use this product on a new table or not?
please help
thanks

I have a 240 sq. ft. cedar deck. Do I need to apply 2 coats of wood stain? Also, how much wood stain, stripper, and brightener do I need to order?

If I can use your sealer on table how do I apply it?

I just bought a composite outdoor table that is showing water stains. Can I use your Sealer product On the table? Thanks

can masonry saver be applied with a roller as opposed to sprayer?

I made an order this week, who can I contact on when this will be shipped?

I ordered a sample of drift wood stain. I did not order any cleaner or conditioner (did not see sample option). How should I prep wood for sample application?

How do I get free shipping on 8 gallons of MasonrySaver paver seller?

What stain do I use on tiger wood

We used your Defy Epoxy Fortified Deck Stain several years ago and would like to use it again but we can’t seem to locate any. Can you help?

I live in Virginia and have a 20 year old 600 SF pressure treated deck which is was last treated 10 years ago with a product called Ready Seal. Overall the wood is structurally solid. What product do you recommend that I use to prep and seal the deck and how much should I purchase?

I used Defy Extreme Stain ( Driftwood Gray) on a boat dock 5 years ago and on a new deck 3 years ago. Both the dock and the deck need reapplication now. How do I prep both surfaces? The boat dock is weathered and porous. The deck is less porous in most places.

Why am i being charged shipping ($16.83) with 5 gallons (5 one-gallons) of 'Defy Extreme 1 Gallon' stain? Also purchasing the 2-gallon sprayer, crack n' groove tool and 4" brush.

I need to remove the solid stain on a deck that butts again my house that is sided in this steel siding.
Will any of the recommended products (cleaner, stripper, brightener) harm the finish? There is NO space between the deck and the siding, so I am unsure of how to accomplish the work without getting the products on the siding.

Could you please tell me the cost of 5 gallons?

I need a solid/opaque stain for my deck which is about 20 years old. All I see is Semi-Trans in your Wood Restoration. What should i use?

What sealant would you recommend for brick pavers that were laid on top concrete

I put on a new pressure treated boat dock deck in February of 2019.
Can I apply the first sealer now with Defy Extreme ???
It is 500 sq ft
Will one - 5 gallon pail be enough??

Is this product good for cedar fencing? It has never been stained is about 12 months old.

I stripped and sanded with 60 grit paper my 7 year old deck. I live in upstate NY. Can I wait until spring to stain?

Hello,
I have a new redwood decking boards which I plan to sand, brighten, then stain. But the posts are 6x6 rough cut fir which have an old coat of stain. How do you recommend removing the old stain on vertical rough cut wood? My concerns are stripper won't penetrate on a vertical surface and the rough surface is not conducive to sanding. Thanks.

If I use the stripper and brightener, do I need the cleaner as well? Or is it clean-strip-brighten.

We have a new deck. The wood is p.t. and is double kiln dried. We like the reviews associated with your stain. We were hoping for a light grey color but you don't seem to have one. Any solutions for us here in Forest City, N.C.. Lastly, given our wood is double kiln dried, how long should we wait to begin the total procedure.

Two questions: 1) I used DEFY Extreme Semi-transparent (light walnut) on our deck 3 years ago. Now it's time to re-stain. How much of the old DEFY stain needs to be removed before I apply the stain? Can there be some left, or does it all need to be power-washed off down the the bare cedar? 2) Last time I bought the stain, I found a local retailer (paint store) and bought it there. Can I only buy your stain via this website now? Thanks!