MasonrySaver Decorative Concrete Sealer 1 Gallon

0 Rating
$41.00
 Back to: MasonrySaver Decorative Concrete Sealer

Seals and protects stamped concrete, decorative concrete, brick, stone and other masonry surfaces from damage and color loss while enhancing the similar to a "wet look".


MasonrySaver® Decorative Concrete Sealer is a non-yellowing acrylic polymer blend sealer formulated for use on properly cured stamped concrete surfaces. Can be applied over both water based and solvent based sealers that have been used previously without having any adhesion issues.

Designed for use on both interior and exterior concrete, MasonrySaver® Decorative Concrete Sealer is suitable for use on a variety of surfaces where a durable gloss finish is desired including concrete patios, driveways, sidewalks and even garage floors.

Product Uses:

  • Stamped Concrete
  • Decorative Concrete Surfaces
  • Brick Pavers
  • Acid Stained Patios
  • Garage Floors
  • Basement Floors

Benefits:

  • Can be applied over previously treated surfaces with solvent-base sealer
  • Water-based formula for easy application and rapid dry time
  • Provides an attractive, gloss finish to masonry and concrete surfaces
  • Protects masonry and concrete surfaces from color fade
  • Seals concrete surfaces making them washable and easy to maintain
  • Non-yellowing, clear finish
  • Durable concrete protection with "hot tire" resistance

LIMITATIONS: Not suitable for use over asphalt surfaces. This product is designed for use on horizontal or vertical surfaces. Do not use on below-grade surfaces that are subject to severe hydro-static pressures. When using in areas subjected to hot tire traffic, allow adequate time for product to cure before putting the area back into surface. When applying over previous coating, hot tire resistance maybe compromised. Do not use if the area will be exposed to softer, high performance tires. Will not "fix" old sealers or coatings that have blushed or turned milky white.

Gallon Sizes:
1's & 5's
Coats Required:
2 Coats.
Coverage Per Gallon:
100-150 sq. ft. per gallon
Temperature:
50-100 F
Application Tools:
Pump Sprayer, Roller
Dry Time:

4-6 hours for foot traffic, 4 days for automobiles. 

Allow 48 hours before waxing.

Cleanup:
Water & Soap
More Info:
Product Data

Reviews

There are yet no reviews for this product.

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly.
    opwdecks · 06/29/2015
    Chad:
    can I use this product around a swimming pool, will it be to slippery when wet?

    It may be slightly slippery util full cure and yes you can use it around pools.
  • We will reply to your comment shortly.
    Chad · 06/29/2015
    can I use this product around a swimming pool, will it be to slippery when wet?
  • We will reply to your comment shortly.
    opwdecks · 06/22/2014
    Dano:
    If I scrub and hose down a stamped concrete area that has been previously sealed. Is there a dry time required prior to sealing?

    Yes at least 24 hours
  • We will reply to your comment shortly.
    Daniel Post · 06/20/2014
    If I scrub and hose down a stamped concrete area that has been previously sealed. Is there a dry time required prior to sealing?