Defy Extreme 5 Gallon

$220.32
free shipping with ground services
Stain Color:
 Back to: Defy Extreme Stain

defy-extreme-color-chart

DEFY-ColorTipsDEFAULTNano-Technology Improves Stain Performance 200-600%

SaverSystems has joint ventured with several companies to develop a new long lasting stain technology.  Our research efforts over the last year and a half have lead to a new development in the performance of exterior, semi-transparent wood finishes to protect your deck.

Project_buttonA newly developed nano-technology used in combination with our existing technology has been found to significantly increase the durability and weather resistance of our synthetic resin based deck stains. This new light stabilizing nano-technology actually works by blocking and absorbing the harmful UV rays from the sun that damage your wood.

Not only does this new technology help prevent wood from graying it also helps prevent water intrusion while resisting  fungal growth. The independent test results are in, and below are photo’s of the actual test boards which show how the new DEFY Extreme new technology stacks up against the best selling national brands.

Defy Extreme Wood Stain utilizes Nano Particles (Similar to Sunscreen) and High Grade Synthetic Resins. When combined they will reflect the sun and provide UV protection that has never been seen in a Tinted Wood Finish. This is a First in the Industry

Defy Extreme Wood Stain can be used on interior or exterior smooth hardwood surfaces including: wood siding, decks, outdoor wood furniture, and other hardwood surfaces.

Defy Extreme - Wood Stain:

  • Utilizing Nano-Particles and Synthetic Resins. Nano Light-Stabilizers block the sun's harmful UV rays preventing graying
  • Nano particles help prevent mold and algae
  • Semi-Transparent wood finish adds color and protection to your wood
  • Stains and seals your wood from water penetration
  • Water-Based with easy soap and water cleanup
  • VOC Compliant and Eco-Friendly formula
  • Leading protection that will outperform all tinted transparent wood stains

Defy Stain Tips and Help

DefyStainHelp.com

Gallon Sizes: 1's & 5's
Coverage Per Gallon: 100-150 sq. feet (100 for 2 coats)
Coats Required: 2 Coats. "Wet on Wet"
Temperature: 45-95 F
Application Tools: Pad, Sprayer, Brush, Roller
Dry Time: 2-4 Hours
Cleanup: Water & Soap
State VOC Limits: Compliant in all States
More Info: Product Data

Reviews

Wednesday, 03 May 2017

We have tried numerous stains and the Defy Extreme is the only stain that lasted the full two years/

thesealerstore
Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly.
    opwdecks · 06/16/2014
    Danny:
    How much do you charge to ship calgary alberta 5 gallon deck stain. Does it need stain finish

    For shipping, add products to cart an enter postal code and country for costs. Thanks!
  • We will reply to your comment shortly.
    Danny · 06/15/2014
    How much do you charge to ship calgary alberta 5 gallon deck stain. Does it need stain finish
  • We will reply to your comment shortly.
    John · 05/19/2014
    I stained my decks this weekend with your Extreme in the redwood color, it turned out looking good. I do have to say the five gallon bucket did not have a small opening on top to help pour it, whats with that? And it says cleans with soap and water? Yea right! Not so much. But I will buy it again if it holds up like you say it does. Plus the easy of reapplication it shows in your video. I would not change anything about the stain to make it more cleanable, just change the 5 gal bucket lid.
  • We will reply to your comment shortly.
    opwdecks · 05/08/2014
    Phil:
    After research and consideration, I decided to go with Defy Extreme to stain my 2 year old deck. It was stained with another product 2 yrs ago. I just received my 5 gal. of Defy Extreme. I have just read these questions and responses, and I now see you do not recommended using Defy stain over previous stains. I wish I had understood this earlier. It should be included in the information about the product.

    You cannot apply Defy or any other brand of penetrating stain on top of a different stain and expect that the new stain will properly adhere and penetrate into the wood. The info is included on our website articles, in the product data sheets on the site, and on the container.
  • We will reply to your comment shortly.
    Phil · 05/08/2014
    After research and consideration, I decided to go with Defy Extreme to stain my 2 year old deck. It was stained with another product 2 yrs ago. I just received my 5 gal. of Defy Extreme. I have just read these questions and responses, and I now see you do not recommended using Defy stain over previous stains. I wish I had understood this earlier. It should be included in the information about the product.
  • We will reply to your comment shortly.
    opwdecks · 04/19/2014
    Derrick:
    Hi - is it possible to blend two colors together? I have the light walnut and redwood samples and testing half n half looks good but wanted to make sure defy doesn't have any objections.

    Absolutely you can blend colors for a custom color.
  • We will reply to your comment shortly.
    Derrick · 04/18/2014
    Hi - is it possible to blend two colors together? I have the light walnut and redwood samples and testing half n half looks good but wanted to make sure defy doesn't have any objections.
  • We will reply to your comment shortly.
    opwdecks · 03/30/2014
    Sally, cedartone is more orange while light walnut is more reddish brown. Redwood is red. There are samples you can order from the site. Extreme would be better.
  • We will reply to your comment shortly.
    Sally DAlessandro · 03/29/2014
    Which as more red in it? The cedar tone or light walnut?
    Also, for beach front decks, Is the Extreme better to the Defy Marine Seal?
  • We will reply to your comment shortly.
  • We will reply to your comment shortly.
    Larry Lu · 09/13/2013
    Replaced the old deck with new pressured treated pine bought from Lowes in late July. Live in Atlanta George. When should I stain my deck? It has been 2.5 months after the new board was installed.
  • We will reply to your comment shortly.
    opwdecks · 09/08/2013
    Opened pails the stain will last less then a year.
  • We will reply to your comment shortly.
    Tom · 09/08/2013
    I am trying to decide how much stain to buy. I am refinishing my deck, and will probably need 3-4 gallons for two wet on wet coats. I am thinking of buying a 5 gallon container, thinking I would just keep to extra for when I need to recoating it. My question is, how long will the unused stain remain good?
  • We will reply to your comment shortly.
    opwdecks · 08/13/2013
    Bleach is actually bad for wood. I would at least use the Defy Brightener to reset the pH balance of the wood after using the bleach.
  • We will reply to your comment shortly.
    Amy · 08/13/2013
    We have a one year old deck that gets a lot of shade. By this summer it was covered with mildew. We bleached and pressure washed it. Would there be any purpose to the cleaner and brightener from Defy? I am not sure what they really do.
  • We will reply to your comment shortly.
    opwdecks · 08/10/2013
    Prep with a wood brightener and heavily rinse the wood when done.
  • We will reply to your comment shortly.
    Gregg · 08/10/2013
    I am going to plane the boards of my Redwood deck due to hail damage. With new wood surface after I plane the wood, how should I prep the wood. I just purchased the Chrystal Clear Extreme Defy.
  • We will reply to your comment shortly.
    opwdecks · 07/10/2013
    2-3 months for the waiting. Prep after the waiting with the Defy Wood Cleaner and Wood Brightener. You can use the pressure washer as a rinsing tool when prepping. You would want the Defy stain for Hardwoods. Natural Pine is the lightest tint. Similar to a clean wet look.
  • We will reply to your comment shortly.
    JC · 07/10/2013
    I'm building a new deck out of redwood in Southern California. It gets full sun from about 8am to 4pm. How long should I wait before staining? Until water doesn't bead and instead is absorbed into the wood? I'd like to seal/stain as soon as possible so what is the minimum amount of time I can wait? Do I need to use a pressure washer on the new wood when I clean/brighten? Which Defy product would you recommend and what color do you recommend for the closest match to the natural redwood color... I'm concerned redwood will be too red but I do not want an orangey color like cedar. Thank you!
  • We will reply to your comment shortly.
    opwdecks · 06/10/2013
    You cannot put the Defy on top of another stain. You should remove first by sanding or stripping. You do need to brighten when done. Maybe the Buternut color in the Extreme.
  • We will reply to your comment shortly.
    Slater · 06/10/2013
    I have a PTL deck (in Maryland) that hasn't been stained/sealed for 6 years (since I bought the house). I power washed the deck and also used a wood cleaner on it however, you can still see most of the old stain on the deck. I just recently replaced the top cap and one deck board with new PTL. My questions are:

    1) Do I also need to use a wood brightener before I stain?
    2) What Defy stain would you recommend? I'm looking for a solid semi-dark stain that can go over the lighter current stain.

    Thanks in advance for your help!
  • We will reply to your comment shortly.
    opwdecks · 06/07/2013
    Yes you would need to remove the old stain first before applying the Defy. if you sand make sure to use a deck cleaner and wood brightener after to help open the wood grain better. Defy typically needs to be redone every 2 years on a horizontal. It can be cleaned and reapplied.
  • We will reply to your comment shortly.
    Cam · 06/07/2013
    Hi,
    I live in southern Ontario Canada. My white cedar deck is about 9 years old. The first year we built it I applied a deck stain from Glidden. The next spring all the horizontal surface was pealing. I got discouraged therefore I haven't done anything to it other than power wash it. The horizontal areas still have some original product on it. Do I have to sand this area before applying your product?
    The horizontal area I will sand to smooth it out. How long will Defy Extreme last on the horizontal area and can I simply reapply Defy Extreme when needed without prepping the deck next time?
    Thanks
  • We will reply to your comment shortly.
    opwdecks · 06/03/2013
    Use the Defy Extreme. Apply two coats wet on wet. You can get high quality pads from our site. Stores carry similar versions.
  • We will reply to your comment shortly.
    Sharon Blazer · 06/02/2013
    We have a PTW pine deck which is about 1 1/2 years old. We have stripped off the clear stain that was applied to the deck,(which didn't work),cleaned, sanded and ready to brighten. Which stain to use, Defy Epoxy or Defy Extreme? We live in Cincinnati, OH.
    Also, should we do 2 coats and use a stain pad? Do we get stain pads at most big box stores or hardware stores? Thank you, S. Blazer
  • We will reply to your comment shortly.
    opwdecks · 05/28/2013
    You do need to remove the old stain first. You would want the Defy Extreme stain for this.
  • We will reply to your comment shortly.
    Peggy · 05/28/2013
    We have a Redwood deck that is about 10 years old, have a redwood semi transparent stain on there now, about three years, so we need to restain. Which product would be best for us to use, the extreme stain or epoxy stain? Also, do we need to sand the old stain off?
    Thank you!
  • We will reply to your comment shortly.
    opwdecks · 04/06/2013
    Bill and Kat, I would use the Defy Extreme Stain for this fir. Only 1 coat on newer wood. Make sure you prep the wood first to remove and mill glaze.
  • We will reply to your comment shortly.
    Bill and Kat · 04/05/2013
    We bought straight grain fir, not PT, last fall to do our porch floor. It has been in our climate controlled garage since then. The porch floor is south facing but does have a roof. We have read the reviews on your products and are happy with them but do not see anyone that has used this type of wood for flooring. Which product do you recommend?
    We want semi-transparent stain to see the grain, but do not want it to fade fast. Plan to reseal about every 2 years.
  • We will reply to your comment shortly.
    opwdecks · 11/07/2012
    New wood needs to weather for a few months then cleaned and brightened prior to staining. I would do this early next Spring. As for the stain, I would use the Defy Extreme Stain in one of the tints.