Defy Extreme Stain 1 Gallon
Defy Extreme Stain 1 Gallon
Defy Extreme Stain 1 Gallon

Defy Extreme 1 Gallon

1 Rating 1 Shopper Review
$44.46
Stain Color:
 Back to: Defy Extreme Stain

defy-extreme-color-chart

DEFY-ColorTipsDEFAULTNano-Technology Improves Stain Performance 200-600%

SaverSystems has joint ventured with several companies to develop a new long lasting stain technology.  Our research efforts over the last year and a half have lead Project_buttonto a new development in the performance of exterior, semi-transparent wood finishes to protect your deck.

A newly developed nano-technology used in combination with our existing technology has been found to significantly increase the durability and weather resistance of our synthetic resin based deck stains. This new light stabilizing nano-technology actually works by blocking and absorbing the harmful UV rays from the sun that damage your wood.

Not only does this new technology help prevent wood from graying it also helps prevent water intrusion while resisting  fungal growth. The independent test results are in, and below are photo’s of the actual test boards which show how the new DEFY Extreme new technology stacks up against the best selling national brands.

Defy Extreme Wood Stain utilizes Nano Particles (Similar to Sunscreen) and High Grade Synthetic Resins. When combined they will reflect the sun and provide UV protection that has never been seen in a Tinted Wood Finish. This is a First in the Industry

Defy Extreme Wood Stain can be used on interior or exterior smooth hardwood surfaces including: wood siding, decks, outdoor wood furniture, and other hardwood surfaces.

Defy Extreme - Wood Stain:

  • Utilizing Nano-Particles and Synthetic Resins. Nano Light-Stabilizers block the sun's harmful UV rays preventing graying
  • Nano particles help prevent mold and algae
  • Semi-Transparent wood finish adds color and protection to your wood
  • Stains and seals your wood from water penetration
  • Water-Based with easy soap and water cleanup
  • VOC Compliant and Eco-Friendly formula
  • Leading protection that will outperform all tinted transparent wood stains

Defy Stain Tips and Help

DefyStainHelp.com

Gallon Sizes: 1's & 5's
Coverage Per Gallon: 100-150 sq. feet (100 for 2 coats)
Coats Required: 2 Coats. "Wet on Wet"
Temperature: 45-95 F
Application Tools: Pad, Sprayer, Brush, Roller
Dry Time: 2-4 Hours
Cleanup: Water & Soap
State VOC Limits: Compliant in all States
More Info: Product Data

Reviews

Thursday, 19 October 2017

Top rated water-based deck stain!

thesealerstore
Related
Defy Wood CleanerDefy_Wood_Cleane_4963bd92e99eb.jpg

Defy Exterior Wood StripperDefy_Exterior_Wo_4963c298329cb.jpg

Defy Exterior Wood BrightenerDefy_Exterior_Wo_4963c156e6e8a.jpg

Defy Extreme Wood Stain 5 GallonDefy Extreme Wood Stain 5 Gallon

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly.
    Daniel · 04/08/2014
    Does Defy render a glossy finish on deck wood such as cedar or pressure treated pine?
  • We will reply to your comment shortly.
    opwdecks · 10/06/2013
    MM, defy extreme does not promote the growth of mold and the zinc oxides will help to prevent growth.
  • We will reply to your comment shortly.
    mm · 10/06/2013
    I have a wood table that does not get a lot of sun and attracts mold growth -- will DEFY prevent the mold?
  • We will reply to your comment shortly.
    opwdecks · 08/25/2013
    Tim, yes that is fine.
  • We will reply to your comment shortly.
    Tim Boggs · 08/25/2013
    I used Extreme clear on the outside of my newly built camper and I have been finishing the inside with the same plywood and would like to use it inside as well. Is it safe to use in the interior where we sleep?
  • We will reply to your comment shortly.
    opwdecks · 08/11/2013
    wanetta, please read this: http://www.defystainhelp.com/prep-new-wood-for-defy-stains/

    Defy Extreme after the waiting.
  • We will reply to your comment shortly.
    wanetta krick-hulsizer · 08/11/2013
    I live in SW Georgia and am putting in a new deck with pressure treated yellow wood. How long should I wait before staining,and what stain should I use? We have high humidity and the sun cooks. Thanks
  • We will reply to your comment shortly.
    opwdecks · 06/30/2013
    4 gallons for the 2 coats.
  • We will reply to your comment shortly.
    nancy · 06/30/2013
    deck is 324 square feet, how many gallons would I need
  • We will reply to your comment shortly.
    opwdecks · 06/18/2013
    You can use the Defy Composite Sealer
  • We will reply to your comment shortly.
    Doug · 06/18/2013
    Do you offer a product that will work on a composite deck?
  • We will reply to your comment shortly.
    opwdecks · 06/08/2013
    yes 2 coats wet on wet.
  • We will reply to your comment shortly.
    Tom Marvel · 06/07/2013
    Are two coats of Deft Extreme usually recommended for an older deck that is in good condition?
  • We will reply to your comment shortly.
    opwdecks · 06/04/2013
    You would need to remove the Biowash first with a stain stripper followed by a wood brightener.
  • We will reply to your comment shortly.
    mark solarz · 06/03/2013
    I have used bio wash natural deck oil, on treated wood. Can defy extreme stain be applied on top of it? What prep would be needed?
  • We will reply to your comment shortly.
    opwdecks · 05/10/2013
    I would use the Extreme for this and it would work well. Make sure clean and brighten the wood first.
  • We will reply to your comment shortly.
    Sam · 05/10/2013
    I recently purchased a house with wood deck. I have no idea what wood the deck is made of and I am guessing it is about 10 years old. Would the extreme be a good choice to use or would you recommend a different product? Thanks.
  • We will reply to your comment shortly.
    opwdecks · 05/08/2013
    New smooth wood is difficult to penetrate. Please read this article:

    http://www.defystainhelp.com/prep-new-wood-for-defy-stains/
  • We will reply to your comment shortly.
    Johnny · 05/08/2013
    The board come smooth on one side. Can you explain more detail why need to wait few months for smooth wood before stain?
    If it is rough, do I clean and brighten before stain?
  • We will reply to your comment shortly.
    opwdecks · 05/08/2013
    If the cedar fence is "rough" wood then you can stain right away. If smooth then you need to let it weather for 3+ months then clean and brighten for the prep.
  • We will reply to your comment shortly.
    Johnny · 05/07/2013
    Building new fence with horizontal frence board on both side of the post so there is hidden side of wood. Wanted to stain with Extreme on all surface of board for protection which mean staining before installation. Question is do I need to wait before staining new cedar (non-treated)? Do I need to clean and brighten before stain? Staining board individually will take time but doable. However cleaning and brightening individual board seems impossible. Any suggestion? What would be the effect if I stain the new wood without doing the prep?
  • We will reply to your comment shortly.
    opwdecks · 04/17/2013
    Jim, for pressure treated wood you would want the Defy Extreme. Please read this about new decks:

    http://www.defystainhelp.com/prep-new-wood-for-defy-stains/
  • We will reply to your comment shortly.
    Justin · 04/17/2013
    Extreme or hardwood
  • We will reply to your comment shortly.
    opwdecks · 03/02/2013
    2 gallons should cover 200 sq. feet for the 2 coats when applied wet on wet. If you have railings and steps then you need to add that sq. footage into the total.
  • We will reply to your comment shortly.
    steph · 03/02/2013
    Our deck is approximately 200 sq. ft. How many gallons do we need to apply the two coats fully?
  • We will reply to your comment shortly.
    opwdecks · 12/09/2012
    Glenn, this would not work for you. Defy is a penetrating sealer that does not create a film or glaze and cannot be blended.
  • We will reply to your comment shortly.
    Glenn Richardson · 12/09/2012
    Dear Defy,
    I am a chainsaw carver (Glennslogart.com) I paint almost everything I carve with exterior grade house paint and augment the Harry Homeowners colors with pigments that are superior light fast artist grade. That said I am looking for a reliable clear acrylic that I can blend for glazing effects and sealing properties. Would your product be suitable for for such an application? I am currently using BM's Arborcoat but It hasn't been getting the best reviews and I want my work to stand up well. -Glenn
  • We will reply to your comment shortly.
    opwdecks · 10/28/2012
    I would wait until spring, clean and then apply one coat to the walking surface.
  • We will reply to your comment shortly.
    Brian · 10/27/2012
    Just applied 2 coats to the rails and upper portion, but only got 2 coats on part of the walking surface of the deck - some parts only got one. On top of that, I got some spotting in one area that I thought was covered - but wasn't. So the upper parts of the deck look fantastic, and the walking surface only so-so

    I'm sure I need to let what I've done sit and weather - how best to correct the part 1 coat and the drip spots? Should I use 2 coats in the spring on the whole walking surface? Thanks.
  • We will reply to your comment shortly.
    opwdecks · 07/31/2012
    You should let the new wood dry for a couple of months then clean and brighten the wood to prep. You can use Defy on PTP wood. If you switch to a different brand later on then it would be best to remove it first.